Painting interior doors—particularly six-paneled doors—by hand is extremely difficult and time-consuming without a sprayer. A sprayer, equipped with the right paint and spray tip size, gives you the smoothest finish on doors, without spending hours of mind-numbing work brushing and rolling each coat of paint.
Setting up a sprayer and a work space for spray painting doors takes time, initially, so using a sprayer makes sense if you're faced with the task of painting multiple doors, but not so much for painting only one.
The best sprayer for spray painting multiple interior doors is an airless sprayer. You can rent them from a paint store, or even buy an inexpensive one from a home improvement store, but if you need a reliable sprayer for repeated use, buying a professional sprayer is a worthy investment.
I do most of my spraying, including cabinets and interior doors, with a Graco 495 Ultra Max airless sprayer. This is a contractor-grade sprayer that I've used for several years without any issues. I personally wouldn't buy any other brand. Graco sprayers last if you take good care of them.
The advantage of using a larger airless sprayer to paint doors is that these siphon paint directly from a paint can, or bucket, so you won't have to reload your paint nearly as much as you would using a cup sprayer.
A hand-held, airless sprayer, or an HVLP sprayer, are also good choices if you're only painting two to three doors. These compact sprayers produce far less over-spray, but they also hold far less paint, making them a bad choice for spray painting several doors. You would have to keep stopping to reload your paint, thinning it to the right viscosity each time. You don't have to thin paint using an airless sprayer.
While it's true that an HVLP sprayer produces a fine finish with less over-spray, you can get excellent results too using an airless, equipped with a fine finish tip of the correct size.
First, set up a work space big enough to accommodate the doors for spraying. What I do is spray doors in a garage, if possible, or I'll have the customer clear a room in the house. The floors need to be covered with heavy-weight drop cloths, or two layers of painter's plastic.
Nearby walls and windows need to be masked with plastic, as well as the room opening if you're spraying inside the house. I highly recommend using the 3M hand masker to do your masking. This tool saves a lot of time, trust me.
I've done it both ways, but it's definitely better to remove the doors and spray them all in one room. You can leave the doors hung and spray them that way, but you'll have to mask all of the hinges and nearby walls with tape and plastic, which usually ends up taking more time than removing them for spraying.
Removing and spraying the doors together keeps the over-spray confined in one room instead of all over the house. When you remove the doors, write a number on the top of each door with a marker so you know which door goes in what room at the end of the job. Stick a piece of tape over the number.
The fastest and easiest way to spray paint interior doors is to spray them standing in pairs, vertically, so both sides can be sprayed. To do this, you'll need to connect each pair of doors at their top edge, using free stir sticks from the paint store, or any piece of scrap wood that's long enough.
Position each pair of doors at a 90-degree angle and drill a stir stick into the top side of the doors to hold them standing up. Connecting the door tops in pairs is easier for one person to do alone, and this method allows all of the doors to be sprayed, both sides, in one spray session.
Another method is to spray them flat and store them on a drying rack. The advantage to spraying doors flat is you won't have to worry about the paint dripping, but depending on your set-up, this method will take more time. With a special drying rack, like the Door Rack Painter, you have the ability to spray both sides, like you would standing them up, without having to wait for one side to dry.
Spraying interior doors flat uses far less space too than positioning pairs of doors all over a room. With a drying rack, the doors are conveniently stacked. The main disadvantage, if the doors are heavy, is flipping them to spray the other side might require two people.
If you're spraying pre-primed, or pre-painted, internal doors, a prime coat isn't necessary. In that case, a light sanding, followed by two coats of durable interior paint, is all that's needed. Unpainted doors that are stained and lacquered need to be sanded and primed with an oil-based primer.
Oak doors involve more prep work before spray painting, mostly to hide the grain. Oak looks horrible when paint is sprayed over its open grain. The grain should always be filled with at least one coat of grain filler so the deep cracks aren't visible through paint. I use Aqua Coat grain filler whenever I'm prepping and spray painting oak.
When spraying doors with an airless sprayer, using the appropriate tip size is very important. Using an oversized tip wastes paint and blows too much over-spray everywhere. The key is to fine tune your application technique, using a tip that throws paint onto doors quickly without making a mess.
The best tip to use for spraying interior doors with an airless sprayer is a 310, or a 312 tip. These tips produce a 6-inch spray fan to coat doors quickly with less overlapping than using a smaller tip.
I use the Graco RAC X spray tips for all of my airless spraying, including doors. The RAC X tips last longer and include Graco's finish finish tips, which I use exclusively for cabinet doors.
Spray doors from top to bottom, working from one side of the door to the other. Always overlap your spray fan about 30 to 50% with each pass. You can also spray doors from side to side, but this works the gun trigger more, and I find it easier to spray from top to bottom.
Using quality paint on your doors is really important. Doors get beat up faster than walls, so the paint should be durable and washable.
The best paint for interior doors you're spraying is one that self-levels. Without self-leveling paint, the paint won't lay out over the surface into a smooth finish as it dries.
The paint I use the most for doors, trim, and cabinets, is Emerald urethane enamel from Sherwin Williams. Without contractor pricing though, this product is very expensive.
A less expensive option is Pro Classic, also from Sherwin Williams. Both products level out beautifully when sprayed. I use Emerald urethane anytime I'm spraying interior doors. The paint dries very hard when fully cured, making the product suitable for use on doors.
Question: Do you ever spray latex, and if so what type of a tip would you use then?
Answer: I spray paint and primer with an airless sprayer on a weekly basis. I use the green FFLP spray tips from Graco. I spray interior doors with a 310 tip. The 6-inch spray fan is perfect for doors. If you're asking about tip sizes for doors, use a 310.
Question: If you don’t have the space to paint doors inside, what are the issues painting outside? Do you have any tips?
Answer: Airborne debris falling into the wet paint can be a problem when painting doors outside, unless you're working inside a garage. You have to be careful with over-spray if you're spraying. Extreme heat, humidity, and cold temperatures, can ruin paint too. Freshly painted doors should not be left outside overnight if it gets too cold. If you're spraying the doors outside of a garage, you can turn your pressure down lower, or even purchase a spray booth tent to contain over-spray.
Question: My friend spray painted half of her door, the smell is killing her. How long will it last?
Answer: Set up a box fan in an open window to suck the fumes out. I don't know what product you used, but acrylic paint fumes (water-based) usually go away not long after the paint dries. Sometimes you'll smell the fresh paint the next day, but the worst of the fumes are usually gone fast. Oil-based paint is another story. The fumes linger longer as the paint dries much slower than acrylic. So I don't know what type of paint your friend used, but use a fan and an open window to ventilate the room. A scented candle will help too.
© 2018 Matt G.